[{"data":1,"prerenderedAt":338},["ShallowReactive",2],{"guide-en-jk-bms-precharge":3,"guides-en":206},{"id":4,"title":5,"body":6,"date":184,"description":185,"extension":186,"keywords":187,"meta":194,"navigation":195,"path":196,"related":197,"seo":202,"stem":203,"updated":204,"__hash__":205},"guides_en\u002Fguides\u002Fjk-bms-precharge.md","JK BMS Precharge: Stop Sparks and SCP Trips on Inverter Start",{"type":7,"value":8,"toc":169},"minimark",[9,13,18,21,24,37,41,44,59,68,72,75,83,87,90,105,108,112,129,137,141,146,149,153,156,160,163],[10,11,12],"p",{},"Precharge is the BMS charging the inverter's input capacitors slowly, through a resistor, before it closes the main MOSFETs. Without it, an inverter's empty capacitor bank draws a huge spike the moment the battery connects. That spike can trip JK BMS short circuit protection, weld or burn contacts, and give you the familiar spark at the terminal. On JK boards that have it, precharge runs only when the BMS turns on from the off state, and its length is set by the precharge time.",[14,15,17],"h2",{"id":16},"why-inverters-trip-short-circuit-protection","Why inverters trip short circuit protection",[10,19,20],{},"An inverter has a large bank of capacitors on its DC input. When they are empty they behave like a short circuit for a few milliseconds. A battery can deliver thousands of amps into that, and the BMS sees exactly what it is built to stop: a current far above its short circuit threshold. It opens the MOSFETs within microseconds, the inverter never starts, and the BMS logs a short circuit.",[10,22,23],{},"The typical symptoms:",[25,26,27,31,34],"ul",{},[28,29,30],"li",{},"a loud spark when you close the breaker or plug in the cable;",[28,32,33],{},"short circuit protection right when the inverter is switched on;",[28,35,36],{},"everything works if you switch the inverter on with the battery breaker already closed, but not the other way round.",[14,38,40],{"id":39},"what-the-precharge-time-does","What the precharge time does",[10,42,43],{},"On boards with a precharge circuit, the BMS first connects the output through a resistor for the precharge time, letting the capacitors fill gently, and then closes the main MOSFETs. Two details matter:",[25,45,46,53],{},[28,47,48,52],{},[49,50,51],"strong",{},"It works only at turn-on."," Precharge runs when the BMS starts from the off state, for example after you press the power button. It does not run when the BMS is already on and you close a breaker between battery and inverter.",[28,54,55,58],{},[49,56,57],{},"The unit is not documented."," JK does not state the unit of the precharge time. Compare the value with what the JK app shows before you change it, and increase it in small steps.",[10,60,61,62,67],{},"If the inverter still trips short circuit protection at start, a longer precharge time is the right fix. Raising the short circuit delay instead makes the BMS slower against a real short. The ",[63,64,66],"a",{"href":65},"\u002Fguides\u002Fjk-bms-ocp-scp-settings","OCP and SCP guide"," explains why that is risky.",[14,69,71],{"id":70},"which-jk-models-have-precharge","Which JK models have precharge",[10,73,74],{},"Precharge is a feature of the JK inverter BMS line (the PB series) and of some newer boards. Many standard boards do not have it, even though the settings frame always carries a precharge time field. On a JK-B2A8S20P with hardware 19H, the BMS refused precharge time as a setting it does not have.",[10,76,77,78,82],{},"You can check your board: ",[63,79,81],{"href":80},"\u002F","connect your BMS"," over Bluetooth. Right after connecting, the editor tests which optional settings the BMS really accepts and marks the missing ones as not on this BMS. If precharge time is missing, you need an external solution.",[14,84,86],{"id":85},"precharging-with-a-resistor","Precharging with a resistor",[10,88,89],{},"For boards without precharge, for very large capacitor banks, or when you connect an inverter to a battery whose BMS is already on, precharge by hand:",[91,92,93,96,99,102],"ol",{},[28,94,95],{},"Leave the main breaker open.",[28,97,98],{},"Connect a resistor of a few tens of ohms, rated for a few watts, across the open breaker or between the battery and inverter terminal. Some breakers and battery switches have a precharge button with a built in resistor.",[28,100,101],{},"Wait a few seconds. Measure the voltage across the open breaker: it should fall to almost zero as the capacitors charge.",[28,103,104],{},"Close the breaker and remove the resistor.",[10,106,107],{},"The resistor only carries current for a moment, so it barely gets warm. Never leave it in place: with the inverter running it would limit the current and overheat.",[14,109,111],{"id":110},"startup-order-that-avoids-trips","Startup order that avoids trips",[91,113,114,117,120,123,126],{},[28,115,116],{},"Inverter off, battery breaker open.",[28,118,119],{},"Precharge, by the BMS at turn-on or by hand with a resistor.",[28,121,122],{},"Close the battery breaker.",[28,124,125],{},"Switch the inverter on.",[28,127,128],{},"Connect loads.",[10,130,131,132,136],{},"With parallel batteries, precharge each pack before you connect it to the bus. The ",[63,133,135],{"href":134},"\u002Fguides\u002Fjk-bms-parallel-batteries","parallel batteries guide"," covers the current limiter that helps when packs at different voltages meet.",[14,138,140],{"id":139},"faq","FAQ",[142,143,145],"h3",{"id":144},"what-is-precharge-in-a-bms","What is precharge in a BMS?",[10,147,148],{},"Precharge charges the capacitors of the inverter or motor controller through a resistor before the BMS connects them fully. It turns a destructive inrush spike into a small, slow current, so the short circuit protection does not trip.",[142,150,152],{"id":151},"do-i-need-precharge-on-a-jk-bms","Do I need precharge on a JK BMS?",[10,154,155],{},"With an inverter, yes, in one form or another. Small DC loads without big capacitors do not need it. If your BMS has no precharge time setting, precharge with a resistor before closing the breaker.",[142,157,159],{"id":158},"why-does-my-jk-bms-trip-short-circuit-when-the-inverter-starts","Why does my JK BMS trip short circuit when the inverter starts?",[10,161,162],{},"The empty input capacitors of the inverter draw a spike that looks like a short circuit. Use the precharge time, or a precharge resistor, instead of raising the short circuit delay.",[10,164,165,168],{},[63,166,167],{"href":80},"Connect your BMS"," to see whether your board has a precharge time and what it is set to.",{"title":170,"searchDepth":171,"depth":171,"links":172},"",3,[173,175,176,177,178,179],{"id":16,"depth":174,"text":17},2,{"id":39,"depth":174,"text":40},{"id":70,"depth":174,"text":71},{"id":85,"depth":174,"text":86},{"id":110,"depth":174,"text":111},{"id":139,"depth":174,"text":140,"children":180},[181,182,183],{"id":144,"depth":171,"text":145},{"id":151,"depth":171,"text":152},{"id":158,"depth":171,"text":159},"2026-10-14","What JK BMS precharge does, why inverter capacitors trip short circuit protection, how to set the precharge time and when you still need a precharge resistor.","md",[188,189,190,191,192,193],"jk bms precharge","jk bms precharge time","jk bms precharge resistor","jk inverter bms precharge","what is precharge in bms","jk bms short circuit on startup",{},true,"\u002Fguides\u002Fjk-bms-precharge",[198,199,200,201],"jk-bms-ocp-scp-settings","jk-bms-inverter-communication","jk-bms-model-number-explained","jk-bms-first-setup",{"title":5,"description":185},"guides\u002Fjk-bms-precharge",null,"t3gcc9LYE-J4tYdm9Iy2OmxI33zSyvKg22W7Zp2hH0g",[207,211,215,219,223,227,231,235,239,240,244,248,253,257,261,264,268,273,278,283,287,291,295,299,303,307,310,314,318,322,326,330,334],{"path":208,"title":209,"description":210,"date":184,"updated":204},"\u002Fguides\u002Fjk-bms-app-alternative","JK BMS App Alternative: Change Settings from Your PC or Browser","Looking for a JK BMS app alternative? Compare the JK app, the PC monitor software, ESPHome and a browser editor that reads and writes settings over Bluetooth.",{"path":212,"title":213,"description":214,"date":184,"updated":204},"\u002Fguides\u002Fjk-bms-bluetooth-not-connecting","JK BMS Not Connecting over Bluetooth: Fixes That Work","JK BMS not connecting or not pairing over Bluetooth? Work through the causes in order: sleep, another app holding the link, permissions, range and the browser.",{"path":216,"title":217,"description":218,"date":184,"updated":204},"\u002Fguides\u002Fjk-bms-calibration","JK BMS Voltage and Current Calibration: How to Do It Right","How to calibrate JK BMS voltage and current: what to measure, which value to enter, why calibration ends in Sending failure, and when to leave it alone.",{"path":220,"title":221,"description":222,"date":184,"updated":204},"\u002Fguides\u002Fjk-bms-error-codes","JK BMS Error Codes: What the Display and LEDs Are Telling You","JK BMS error codes explained: what the Err numbers, the ALM light and the app alarms mean, which codes users have matched to real faults, and how to find the cause.",{"path":224,"title":225,"description":226,"date":184,"updated":204},"\u002Fguides\u002Fjk-bms-firmware","JK BMS Firmware: V15 vs V19 and How to Update Safely","JK BMS firmware explained: how to read your hardware and software version, what changed from V11 to V15 and V19, and how to update without bricking the BMS.",{"path":228,"title":229,"description":230,"date":184,"updated":204},"\u002Fguides\u002Fjk-bms-first-setup","How to Set Up a New JK BMS: First Start Step by Step","Set up a new JK BMS the right way: wiring order, first power-on, passwords, cell count, a chemistry preset, current limits and a verified write over Bluetooth.",{"path":232,"title":233,"description":234,"date":184,"updated":204},"\u002Fguides\u002Fjk-bms-not-charging","JK BMS Not Charging or Discharging: Why the MOSFET Is Off","JK BMS not charging or not discharging? Find which protection or switch turned the MOSFET off, how to tell the causes apart and which setting fixes each one.",{"path":236,"title":237,"description":238,"date":184,"updated":204},"\u002Fguides\u002Fjk-bms-not-turning-on","JK BMS Not Turning On: How to Start and Wake It Up","JK BMS not turning on? Learn how to activate a new board with a charger or the button, wake it from sleep, and find the wiring faults that keep it dark.",{"path":196,"title":5,"description":185,"date":184,"updated":204},{"path":241,"title":242,"description":243,"date":184,"updated":204},"\u002Fguides\u002Fjk-bms-reset","How to Reset a JK BMS: SOC, Capacity, Alarms and Settings","How to reset a JK BMS: reset the SOC, the capacity, a stuck alarm or all settings, what the cycle count really is, and why you should back up before any reset.",{"path":245,"title":246,"description":247,"date":184,"updated":204},"\u002Fguides\u002Fjk-bms-smart-sleep","JK BMS Smart Sleep: What the Voltage and Time Settings Do","What JK BMS smart sleep does, how the smart sleep voltage and time work together, how to wake a sleeping BMS and which values to use for home storage or a camper.",{"path":249,"title":250,"description":251,"date":252,"updated":204},"\u002Fguides\u002Fjk-bms-alarms-list","JK BMS Alarms List: Every Alarm, Its Cause and the Fix","All JK BMS alarms in one table: what each one means, what usually triggers it and which setting governs it, from cell OVP and MOS OTP to wire resistance.","2026-10-12",{"path":254,"title":255,"description":256,"date":252,"updated":204},"\u002Fguides\u002Fjk-bms-inverter-communication","JK Inverter BMS Communication: Deye, Victron and Growatt Setup","Connect a JK inverter BMS to Deye, Victron or Growatt over CAN or RS485: protocol number, port mode, DIP address, cable pinout and the inverter-side settings.",{"path":258,"title":259,"description":260,"date":252,"updated":204},"\u002Fguides\u002Fjk-bms-model-number-explained","JK BMS Model Numbers Explained: B2A8S20P, PB2A16S20P and More","Decode any JK BMS model name: series, balance current, cell count and current rating, plus the -H, -HC and -R suffixes and what they mean for heating, CAN and RS485.",{"path":134,"title":262,"description":263,"date":252,"updated":204},"JK BMS Parallel Batteries: Wiring, DIP Addresses and Settings","Connect several JK inverter BMS packs in parallel: busbar wiring, the RS485-2 link, DIP switch addresses, the master pack, matching settings and current limits.",{"path":265,"title":266,"description":267,"date":252,"updated":204},"\u002Fguides\u002Fjk-bms-temperature-heating-settings","JK BMS Temperature and Heating Settings: Safe Values for LiFePO4","Set JK BMS charge and discharge temperature limits, MOS OTP and the heating function. Why the -20 °C factory default is wrong for LiFePO4 and what to use instead.",{"path":269,"title":270,"description":271,"date":272,"updated":204},"\u002Fguides\u002Fjk-bms-soc-stuck-at-99","JK BMS SOC Stuck at 99%: Why It Never Reaches 100% and the Fix","JK BMS SOC stuck at 99% and never showing 100%? See what the BMS waits for at the end of charging, the six usual causes, and the settings that fix it.","2026-10-07",{"path":274,"title":275,"description":276,"date":277,"updated":204},"\u002Fguides\u002Fjk-bms-bluetooth-browser","Change JK BMS Settings over Bluetooth in Your Browser","Connect to a JK BMS from Chrome or Edge, read every setting, apply a preset and write it back in a safe order with read-back checks. No JK app needed.","2026-10-04",{"path":279,"title":280,"description":281,"date":282,"updated":277},"\u002Fguides\u002Fjk-bms-balance-settings","JK BMS Balance Settings: Start Voltage, Trigger, Current","JK BMS balance settings explained: start balance voltage, balance trigger voltage, max balance current and the Balancer switch, for LFP, NMC and LTO.","2026-10-02",{"path":284,"title":285,"description":286,"date":282,"updated":204},"\u002Fguides\u002Fjk-bms-cell-overcharge-protection-tripping","JK BMS Cell Over Charge Protection Keeps Tripping: Causes and Fix","JK BMS cell over charge protection tripping and releasing every minute? See why a charger set too high causes it, how to tell it from a weak cell, and how to fix it.",{"path":288,"title":289,"description":290,"date":282,"updated":277},"\u002Fguides\u002Fjk-bms-detail-log","How to export and read the JK-BMS Detail Log","What the JK-BMS Detail Log contains, how to export it from the app, how to read its events and what the log analysis page tells you about trips and faults.",{"path":292,"title":293,"description":294,"date":282,"updated":277},"\u002Fguides\u002Fjk-bms-export-import-settings","Export and Import JK BMS Settings: The .jkcfg File Guide","How to export and import JK BMS settings with the app, what the .jkcfg file contains, why hand edits break it, and how to edit it safely in your browser.",{"path":296,"title":297,"description":298,"date":282,"updated":277},"\u002Fguides\u002Fjk-bms-lifepo4-settings","JK BMS Settings for LiFePO4: 8S and 16S, 280Ah and 314Ah","JK BMS settings for LiFePO4 packs: per-cell voltage, balance, current and temperature values for 8S and 16S with 280Ah and 314Ah cells, in three wear levels.",{"path":300,"title":301,"description":302,"date":282,"updated":204},"\u002Fguides\u002Fjk-bms-log-messages-explained","JK BMS Log Messages Explained: Boot, Time calibration, Protections","What each JK BMS log message means: Boot, Time calibration, APP open charge, protection trips and releases, Discharge On Failed and Unknown Log Code [0].",{"path":304,"title":305,"description":306,"date":282,"updated":277},"\u002Fguides\u002Fjk-bms-nmc-lto-settings","JK BMS Settings for NMC and LTO: Safe Per-Cell Values","JK BMS settings for NMC and LTO packs: per-cell OVP, UVP, balance, temperature and C-rate values in three wear levels, plus how the editor detects chemistry.",{"path":65,"title":308,"description":309,"date":282,"updated":277},"JK BMS Overcurrent Protection Settings: OCP and SCP Guide","JK BMS overcurrent protection settings explained: charge and discharge OCP limits, delays, recovery times and SCP, with ranges and sizing for inverters.",{"path":311,"title":312,"description":313,"date":282,"updated":277},"\u002Fguides\u002Fjk-bms-parameters-explained","JK BMS Parameters Explained: Every Setting by Group","JK BMS parameters explained in one glossary: cell OVP, OVPR, UVP, UVPR, balance, SOC, RCV and RFV, current and temperature limits, with typical LFP ranges.",{"path":315,"title":316,"description":317,"date":282,"updated":277},"\u002Fguides\u002Fjk-bms-password","JK BMS Password: Default Codes, Change and Reset Guide","Your JK BMS password is really two codes: Bluetooth and settings. See factory defaults, how to change them, what to try if one fails, and what to do if lost.",{"path":319,"title":320,"description":321,"date":282,"updated":277},"\u002Fguides\u002Fjk-bms-reboots-power-events","JK BMS Reboots and Charge MOS Off: Reading Power Events in the Log","JK BMS reboots or the charge MOS switched off by itself? Learn to read Boot rows and MOS state in the Detail Log and tell expected restarts from real faults.",{"path":323,"title":324,"description":325,"date":282,"updated":277},"\u002Fguides\u002Fjk-bms-sending-failure","JK BMS Sending failure: Causes and Step-by-Step Fix","JK BMS Sending failure on import? See why the firmware rejects settings (voltage chains, write order, SCP delay) and how to fix it step by step.",{"path":327,"title":328,"description":329,"date":282,"updated":272},"\u002Fguides\u002Fjk-bms-soc-calibration","JK BMS SOC Calibration: Fix SOC Drift, Jumps and Reset","JK BMS SOC calibration explained: why SOC drifts or jumps, what the SOC-100% voltage and SOC-0% voltage do, and how to set them and recalibrate the pack.",{"path":331,"title":332,"description":333,"date":282,"updated":204},"\u002Fguides\u002Fjk-bms-weak-cell-log","Find a Weak Cell with the JK BMS Log: Trips, Spread and Balance","Find a weak cell in the JK BMS Detail Log: which cell trips first, how wide the spread is at the trip, and whether it is balance drift or a bad cell.",{"path":335,"title":336,"description":337,"date":282,"updated":277},"\u002Fguides\u002Fjk-bms-wire-resistance","JK BMS Wire Resistance: Fix Abnormal Balance Wire Alarm","JK BMS wire resistance explained: what the abnormal resistance of the balance wire warning means, normal values, common causes and how to fix a bad lead.",1791980002791]